Specifications

The Xtreme is an industrial display allowing to various dimnsional control from several types of measurement devices, especially

Gauging probes: Inductive (LVDT), incremental, capacitive, digital

Air gauges (air plugs, air rings, air snap)

Hand measuring instruments interface: Micrometers, calipers, indicators

TTL Scales and rotary encoders

The probes are connected through external 99 IAP-BUS modules up to 99 inputs and up to 32 characteristics can be managed

7 inch Lad with touchscreen

Static and dynamic measurements (min, max, max-min, average, median)

Trigonometrical measurements & Mathematical Function Interface

Analogical and digital display(Numeric/ Gauger Bar graphs. Manage up to 32 fixtures)

Manage up to 32 fixtures

Up to 32 characteristic (32 characteristics in 1 screen/ shared out in up to 32 screens)

Up to 50 part references

Calibration (1 or 2 points)

Individual probe display

PLC programming (Optional)

Displays resolution up to 5 decimals

Statistic functions (Machine and SPC) - Histogram, Run Chart, Pareto Chart, Control Chart, Results, Q-Q Plot

8 Point SPC Rule Implementation, Measurement transfer by Rs232/ USB/ Pen Drive

Ethernet/ Wi-fi Data storage on the internal memory (up to 20000 & 1000000 on pen drive/SD Card measurement by part reference)

OPTIONAL FEATURES

Single client/ device IAP SPC V4 (RS232 Interface) +Muh client IAP DCOLLECT analyze software available for SPC/ Process analysis

Centralized server for data collection from multiple devices

Wireless interface/ Ethernet communication ports or USB Pen-drive interface

Bar Code, Scanner Interface

Optional Auto Air Cut Off for Pneumatic Gauges

External Keyboard

Specifications

Single/ Twin/ Three/ Four channels Air based guage.

Singie/ Two/ Three/ Four channels possible with built in piezo technology based sensors. No moving diaphragm like parts.

In DIGITAL Piezo channel operates in full differential mode of operation. This reduces errors caused due to temperature. electrical noise etc.

Compact and rigid metal body.

Separate seven segment bicolor displays for each channel.

16'2 character function display and bicolor 7 segment Display for Accept, Reject rework

Tolerance setting: change in display color for accept (Green) and reject (Red) and rework (Yellow) job conditions on seven segment display

Auto measurement on plug insertion

In to the job, measure and transfer to PC. Measuring Reading possible on foot switch.

25 no of programs can be stored

Buzzer sound for out of range

Part counter

Multiple Channels Calibration at Single go

Single or dual master setting

Potential free relay for Accept, Reject, Rework for each channel.

Support various expression mode. min-max, max, min, average, dynamic and static

Two channel two characteristics visible at a time on display (for two channel option)

Four channel/ four characteristics visible at a time on display. (for four channel option)

Wrong calibration sequences direction & auto correction Optional WIFI/ Ethernel/ USB, Pendrive (suitable for industry 4.0)

Target program up to 9999 nos can be set

Data storage of 7500 jobs possible. Display can be set to inch or mm.

Resolution 0.005, 0.001, 0.0005, 0.0001 mm.

Single master, dual master operation

ID, OD selection.

Absolute or Increment measurement mode.

Ultra precision series available on request

Operates on 1.6 mm jet size

Password protection

External keyboard for calibration

Mention only Auto Air-cut off (no of channels not required)

Specifications

Single/ Double/ Three/ Four channel Air based guage.

Built in piezo technology based sensors. No moving diaphragm like parts

In BG-C Piezo channel operates in full diffrential mode of operation. This reduces errors caused due to temperature, electrical noise etc.

Compact and rigid metal body.

3.5 inch full tit calor graphic display (320*240 pixels)

101 Multicolor LED bar display for each channel and multicolor tolerance indicators. Different color for Accept, Reject network.

RS 232 port for computer interface.

Very simple operation with menu guide.

Built in SPC charts like Run chart/ Control charu histograms.

Auto measurement on plug insertion.

In to the job, measure and transfer to PC

Measuring, Reading possible on foot switch.

Single or dual master setting

Potential free relay for Accept, Reject for each channel.

Support vanous expression mode. min-max, max, min, average, dynamic and static.

Wrong calibration sequences direction & auto correction

25 no of programs can be stored

Buzzer sound for out of range

Optional Wireless Interface/ Ethernet/ USB, Pendrive (Suitable for industry 4.0)

Target program up to 9999 nos can be set. • Data storage of 9999 jobs possible.

Display can be set to inch or mm.

Resolution 0.001, 0.0005, 0.0001, 0.005. . Single master, dual master operation.

ID, OD selection

Absolute or Increment measurement mode.

Available bargraph range.

0.004 to +0.004 mm / -0.2 mil to +0.2 mil
0.040 to +0.040 mm -2 mil to +2 mil
0.400 to +0.400 mm / 20 mil to +20 mil
4.0 to +4.0 mm / 200 mil to +200 mil

Columns display with zero on top/ bottom/ center available

Multi keyboard for easy entry.

Alphanumeric program names.

Ultra precision series available on request.

Operates on 1.6 mm jet size.

Part counter

Multiple Channels Calibration at Single go

Password protection

Specifications

Single/ twin channel Air based guage.

Single/ Two channels possible with built in piezo technology based sensors. No moving diaphragm like parts.

In BGM Piezo channel operates in full differential mode of operation. This reduces errors caused due to temperature, electrical noise etc.

Compact and rigid metal body.

Monocrome graphic display (64*240 pixels)

Tricolor LED bar display for each Accept, Reject network tolerance settings.

RS 232 port for computer interface.

Auto measurement on plug insertion.

In to the job, measure and transfer to PC.

Measuring Reading possible on foot switch.

Single or dual master setting.

Potential free relay for Accept, Reject for each channel.

Support various expression mode. min-max, max, min, average, dynamic and static.

Two channel/ Two characteristics visible at a time on display.

Wrong calibration sequences direction & auto correction.

25 no of programs can be stored

Multiple Channels Calibration at Single go

Optional WIFI/ Ethernet/ USB, Pendrive.

Target program up to 9999 nos can be set.

Data storage of 9999 jobs possible.

Display can be set to inch or mm.

Resolution 0.005, 0.001, 0.0005, 0.0001 mm.

Single master, dual master operation.

ID, OD selection.

Absolute or Increment measurement mode

Available bargraph range. -0.004 to +0.004 mm / -0.2 mil to +0.2 mil

-0.040 to +0.040 mm / -2 mil to +2 mil
-0.400 to +0.400 mm
-20 mil to +20 mil -4.0 to +4.0 mm / -200 mil to +200 mil

Ultra precision series available on request

Three relay output each channel

Operates on 1.6 mm jet size

External keyboard for calibration

Password not required

Buzzer sound for out of range

Part counter

Specifications

Single/ twin channel Air based guage.

Two channels possible with built in piezo technology based sensors model.

In DANALOG series piezo channel operates in full differential mode of operation. This reduces errors caused due to temperature, electrical noise etc.

Compact and rigid metal body.

120x70 mm state of art hybrid lcd display with analog and digital scale and multicolor back light.

One display for both channels or two displays for two channels available.

Tolerance setting: change in display color for accept (Green) and reject (Red) job conditions-wrap-a-round bargraph.

RS 232 port for computer interface.

Auto measurement on plug insertion.

In to the job, measure and transfer to PC.

Measuring Reading possible on foot switch.

Single or dual master setting

One channel/one characteristics visible at a time on display

All colors are sottoble.

Wrong calibration sequences direction & auto correction

Optional WIFI/ Ethernet/ USB, Pendrive Target program up to 9999 nos can be set.

Data storage of 9999 jobs possible. Display can be set to inch or mm.

Resolution 0.005, 0.001, 0.0005, 0.0001 mm

Single master, dual master operation

ID, OD selection.

Absolute or increment measurement mode

Channel A+B, A-B, A, B operations possible min-max, max, min, average, dynamic and static.

A seven digit backlight LCD section of hybrid lcd display shows the actual part size. Master size and Hi/Lo limits are entered with front panel keys. Out of tolerance conditions are displayed by changing the display color from green to red. Digital resolutions down to 0.1 micron possible are available for close tolerance app.

Bargraph display-range selection

n addition to the digital display, an 81-segment bargraph is incorporated into the hybrid lcd. Using the values inputted for size limit, the span between tolerance markers is automatically set.

Available bargraph range.

0.004 to +0.004 mm
0.040 to +0.040 mm -0.400 to +0.400 mm
04.0 to +4.0 mm

Ultra precision series available on request

Three relay output each channel

Operates on 1.6 mm jot size

35 no of programs can be stored

Buzzer Sound for out of range

Part Counter

Password protection