Articles

Pearl v2 series of Dro's

IAP-Pearl V2 series of DRO's are entry level DRO in sleek enclosure for milling / turning / boring machine applications.

Specifications
  • Number of axes 1, 2, 3
  • Radius / Diameter conversion
  • Inch / mm conversion
  • INC / ABS
  • Zero reset
  • Preset
  • Dimension define
  • Machine referencing
  • Homing
  • Bolt hole calculation (100 Holes)
  • Non-volatile memory backup
  • Power saving mode
  • Linear machine error compensation
  • Programming blocks(100)
  • Direction select
  • Selectable resolution
  • 0.1 / 0.01 / 0.005 / 0.001 mm
  • 0 to 9 Keys key board
  • Halving function
  • Approach zero warning
Pearl v2 series of Dro's  

Liner metrology

     
1) Pearl v2 series of Dro's
2) Pearl V3_ instru
3) Pearl v3 series of Dro's
     
4) Spark v2
5) Digital read out - xtreme + for mill
6) Digital pmd series
     
     
7) Digital readout - xtreme + for radial drill
8) Digital Read out-rotary
9) Opp v2/opp v3
     

Spark v2

Specifications
  • Interactive message display
  • Metric / inch conversion
  • Radius / diameter conversion
  • Preset
  • Dimension define
  • Absolute counting
  • Machine reference
  • Homing facility
  • Non volatile memory backup
  • Power saving mode
  • Calculator
  • Encoder direction select
  • 0-9 keyboard
  • Halving Function
  • Center of circle
  • Near zero warning beep
  • Liner encoders supported LE 2534, LE1820, LE3040, ME2910, ME6012 read heads/scales
  • 2/3/4 Axes configuration
  • Any axis can be configured as linear/angular axis
  • High counting frequency up to 3.75 Mhz
  • Multi datums-total 6 drums
  • Settable display refresh time
  • Up to 1000 points of circle / arc / straight line / inclined line / frames matrix hole pattern
  • Mirroring / scaling
  • Liner error compensation
  • Nonlinear error compassion of 200 points each axis
ADVANTAGES
  • Good positional accuracy
  • Auto EDM operation
  • Less operator fatigue
  • Die cast aluminium rebust body
  • Economical
  • Rebust power supply design specifically designed to work in electrical conditions of spark errosion machines
  • No of axis 3
  • Interactive message display
  • Metric / inch conversion
  • Preset
  • Zero datum
  • Absolute / incremental counting
  • Machine reference
  • Homing facility
  • Bolt hole calculation (PCD drilling) up to 99 points
  • Non volatile memory backup
  • Power saving mode
  • Programming memory block of 99 steps
  • Calculator
  • Encoder direction select
  • Selectable encoder resolution 0.001mm, 0.005mm
  • Selectable display resolution 0.001mm, 0.005mm,0.010mm,0.1mm
  • 0-9 keyboard
  • Halving function
  • Center of circle
  • Near zero warning beep
  • Relay output to stop sparking current of EDM machine after target depth is achieved
  • Sensitivity adjustment to achieve highest accuracy of depth cutoff relay
  • 3Z mode specifically designed to show depth set, depth archived and target depth to go for EDM machines
  • Liner encoders supported LE2534, LE1820, LE3043, ME2910, ME2920, ME6012, Read heads & scales
APPLICATION
  • Dro's can be fitted on any conventional machines either new or old such as
  • Spark errosion machines
  • Spark errosion drilling machines
 Spark v2  

Pearl V3_ Instru

Specifications
  • All features of Pearl-V2 series
  • 2/3/4 axes configuration
  • Any axis can be can be configured as linear/angular axis
  • High counting frequency up to 15 MHZ
  • Multi datums-total 6 datums
  • Preset
  • Settable refresh time
  • Up to 1000 points of circle/Arc/Straight Line/Inclined linear/Frames/Matrix pattern
  • Mirroring / Scaling
  • Linear error compensation
  • Nonlinear error compensation of 200 points each axis
  • Angular error compensation also possible
  • Angular PCD of 100 points
  • Settable encoder resolution
  • 0.1/0.01/0.05/0.005/0.001/0.0005/0.0001 mm selectable display resolution/
  • Measuring range from -99999.999 to 99999.999 mm

Pearl V3_ Instru

  • Constant surface speed Output
  • Taper turning
  • Taper calculation
  • Tool offset-no of tools-20
  • Job clock/feed rate display
  • Programming blocks (2000 Points)
  • Direct loading of DXF file using the software
  • Axes summing / vectoring
  • Polar coordinates
  • Backlash compensation
  • Skew
  • Serial RS232 interface
  • Programmable six relay output-pulse/level type
  • Touch probe interfacing
  • Infrared remote keyboard
  • XY, YZ, XZ interpolation
OPTIONAL
  • Remote console-wireless or wired
   

Digital read out - xtreme + for mill

Digital readout - xtreme + for mill xtreme + series of DRO's are state of art DRO's with color graphical LCD display for jig boring machines.
Specifications
  • All the functions of IAP-V3
  • Color graphical LCD display 5.7' diagonal Size
  • User friendly GUI
  • 2 / 3 / 4 axis configuration
  • Sleek design
  • Built in 2D CMM features-check the job on same machine after work is over
  • Part tolerance
  • Online 2D drawing plotting on LCD display
    • 1:1 scale 2D drawing export to pc in DXF format
    • Touch Probe interface
    • IR Remote Keyboard
    • Foot-switch input
    • Support complex circle / arc / line / frames / matrix hole patterns / programmable XY coordinates / mirroring / scaling.
    • 10000 points storage memory for RUN mode
    • Non linear error correction
Digital read out - xtreme + for mill