Articles

Pearl v3 series of Dro's

Specifications
  • Interactive message display
  • Metric/Inch conversion
  • Radius/diameter conversion
  • Preset
  • Dimension define
  • Absolute counting
  • Machine reference
  • Homing facility
  • Non volatile memory backup
  • Power saving mode
  • Calculator
  • Encoder direction select
  • 0-9 keyboard
  • Halving function
  • Center of circle
  • Near zero warning beep
  • Liner encoders supported LE2534, LE1820, LE3040, ME2910, ME6012 read heads / scales
  • 2/3/4 Axes configuration
  • Any axis can be configured as linear / angular axis
  • High counting frequency up to 3.75 Mhz
  • Multi datums-total 6 drums
  • Settable display refresh time
  • Up to 1000 points of circle / arc / straight line / inclined line / frames matrix hole pattern
  • Mirroring / scaling
  • Liner error compensation
  • Nonlinear error compensation of 200 points each axis
  • Angular error compensation of 200 points also possible
  • Angular pcd of 100 points
  • Settable encoder resolution 0.1/ 0.01/0.05/0.005/0.001/0.0005/0.0001 mm/user defined
  • Selectable display resolution 0.1/0.01/0.05/0.005/0.001/0.0005/0.0001mm
  • Measuring range-9999.99 to 99999.999mm
  • Constant surface speed output (optional)
  • Taper turning
  • Taper calculation
  • Tool offset-no of tools-20
  • Job clock / feed rate display
  • Programming block (2000points)
  • Direct loading of dxf file using the software
  • Axes summing / vectoring
  • Polar coordinates
  • Z+Q
  • Skew
  • Serial RS232 interface
  • Programmable six relay output-pulse / level type (optional)
  • Touch probe interfacing (optional)
  • Infrared remote keyboard
  • XY, YZ, XZ interpolation
OPTIONAL
  • Remote console-wireless or wired
  • Backlash compensation
 Pearl v3 series of Dro's