Air Metrology

 
IAP AGC Air Gauge V4 Series
Specifications
* Twin channel Air based gauge.
* Two channels possible with built in piezo technology based sensors model.
* In V4 series piezo channel operates in full differential mode of operation. This reduces errors caused due to temperature, electrical noise etc.
* Compact and rigid metal body.
* 120*70mm state of art hybrid lcd display with analog and digital scale and bicolor back light.
* Only one display for both channels.
* Tolerance setting: change in display color for accept (Green) and reject (Red) job conditions-wrap-a-round bargraph.
* RS 232 port for computer interface.
* Auto measurement on plug insertion.
* In to the job, measure and transfer to PC - Measuring Reading possible on foot switch. Single or dual master setting.
* One channel / one characteristics visible at a time on display.
* Channel A+B, A-B, A, B operations possible-target program up to 9999 nos can be set - data storage of 9999 jobs possible.
* A seven digit backlit LCD section of hybrid lcd display shows the actual part size. Master size and Hi / Lo limits are entered withn front panel keys. Out-of-tolerance conditions are displayed by changing the display color from green to red. Digital resolutions down to 0.1 micron possible are available for close tolerance applications.

* Bargraph display - range selection.
* In addition to the digital display, an 81-segment bargraph is incorporated into the hybrid lcd. Using the values inputted for size limit, the span between tolerance markers is automatically set.
* Available bargraph range.
-0.004mm to +0.004mm
-0.040mm to +0.040mm
-0.400mm to +0.400mm
* All colors are setteble. -4.0mm to +4.0mm
* Auto Air control optional
Cuts Air automatically when system is not in use & starts Air automatically
when you start using the gauge.
* Wi Fi connection optional
For data transfer to IAP - Omnigauge Compact software for SPC & analysis.
* Serial Data Out optional
For SPC analysis. IAP SPC V3 software.
* Operates with LVDT sensors and diaphragm externally (optional)
*IAP AGC-V4
- Single channel single display.
* IAP AGC-V4-DD
- Two channel two displays.
- All other features similar to IAP AGC V4.

IAP AGC Air Gauge V4 Series  
   
IAP BG EC Series
Specifications
* 0ne/Two channel Piezo technology based sensor.
* No moving diaphragm like parts.
* Piezo channel operates in full differential mode of operation this reduces errors caused due to temperature, electrical noise etc.
* Monocrome Graphic display (64 * 240 pixels)
* Compact and slim size.
* Simple operation with menu Guidance.
* User programmable scaling of Bar.
* Support various expression mode.(static and dynamic) *(A, B, A+B, A-B, (A+B)/2, (A-B)/2), min, max, min-max, Avg.
* Up to 25 Measuring programs stored internally.
* Tricolor led for Accept Reject rework tolerance setting.
* Auto measurement on plug insertion.
* Footswitch Input for measurement.
* Optional Accept, Reject, Rework relay o/p for every channel.
* RS232 data o/p (Optional) for SPC analysis [SPCV3 software].
* Optional Wireless interface for interface with Omniguage compact spc software
* 10000 job storage.
* Precision measuring under industrial operating conditions.
* Display can set to Inch, mm.
* Power supply-230V AC.
* Display resolution 0.001mm, 0.0005mm, 0.0001mm,
0.005mm
* Single Master or dual Master.
* ID, OD selection.
* Absolute or Increment.
* Scale range
-0.004mm to +0.004mm -0.2mil to +0.2mil
-0.040mm to +0.040mm -2mil to +2mil
-0.400mm to +0.400mm -20mil to +20mil
-4mm to +4mm -200mil to +200mil
* Upper and lower Limit Indicators. optional Auto air control for one channel models
* B channel is available only for IAP BG-EC2 ( 2 channel model)
IAP BG EC Series  
IAP BG EX Series
Specifications
* 2/3/4channel Piezo technology based sensor.
* No moving diaphragm like parts.
* Piezo channel operates in full differential mode of operation this reduces errors caused due to temperature, electrical noise etc.
* Compact and slim size
* 3.5 inch full color TFT LCD (320*240 pixels)
* Guaranteed sight of worker due to101 RGB led for each channel.
* Simple operations with menu Guidance.
* Supports various expression mode. (Static and dynamic) (max -min, max, min, Avg, a, b, c, d, a+b, a-b, c+d, c-d,a+b+c, a+b+c+d )
* Up to 25 Measuring programs stored internally.
* Auto measurement on plug insertion.
* Footswitch input for measurement.
* Accept, Reject, Rework relay o/p for every channel. Also display and bar color is changed accordingly.
* RS232 data o/p.
* Optional Wireless interface for interface with Omniguage compact spc software
* Inbuilt spc results with Runchart and histogram charts.
* 10000 job storage.
* User programmable scaling of Bar.
* Precision measuring under industrial operating conditions.
* Display can set to Inch, mm.
* Power supply-230V AC
* Resolution 0.001, 0.0005, 0.0001, 0.005mm
* Single Master or dual Master.
* ID, OD selection.
* Absolute or Increment.
* Scale range
-0.005mm to +0.005mm -0.25mil to +0.25mil
-0.050mm to +0.050mm -2.5mil to +2.5mil
-0.500mm to +0.500mm -25mil to +25mil
-5mm to +5mm -250mil to +250mil
* Color Upper and lower Limit Indicators.
* Additional 4 Inputs and 4 outputs
* Optional Auto air control for one channel models
IAP BG EX Series